When people complete gi reviews, you always have to wonder if they've washed the gi first or if it is fresh from the retailer.
In the following paragraphs, we’ll be covering a few different things people need to be aware of.
- How you can secure color on a brand-new non-white gi
- How you can shrink your gi
- How to wash your gi without shrinking it
- How you can ensure it lasts as long as possible
- How to get the funk and stink out of your gi
How to wash and shrink your BJJ gi (2018 Guide)
The first time that you wash a gi is the most important. It can really be a make or break time because it really sets the standard for how you’ll treat your gi in the future. If you take care of it from the start (by following this guide), then you can be sure that it will last you a long time.
- Turn your gi inside out (this will keep your patches, stitching and color secure). Don't believe me? Look at an old black or blue gi and see which side is more faded. I'm willing to be it's the outside. That isn't just from rolling. It's from washing as well, so if you turn your gi inside out, it will help the exterior of the gi last longer.
- Wash in cool water. Never use warm water (unless you want you gi to shrink, if so, see below). If you're super freaked out by germs, warm and/or hot water is fine, just be aware that your gi may bleed or shrink as a result.
- Hang or even line dry. It's incredibly important to note here that hanging out gi outside can do serious damage to the integrity of the fabric. Sun and UV damage will drastically reduce the durability of your gi if you hang it outside in direct sunlight after every wash or after every training. We recommend hanging your gi indoors or outdoors, but out of direct sunlight.
- Never ever use chlorine bleach. Chlorine bleach will ruin the materials of the gi.
The Great Belt Debate
As my martial arts experience is rooted in traditional martial arts (shotokan karate), I had never washed my belt before I trained BJJ.
Many people still argue that you shouldn't, or don't have to, wash your belt.
I take a firm stance that these people are wrong. And gross. The belt is cloth that holds bacteria and other nastiness just like your gi.
Thus, it should be washed in a similar manner.
If you would like your gi to shrink
Disclaimer: Consistently washing and drying your gi on hot may weaken the material and/or cause the color to fade prematurely.
It is always advised that you order your gi based on each brands' own sizing chart. If the uniform fits a tad too big out of the bag, a clothing dryer -properly used- may be used make the gi, “shrink to fit“.
- We advise primary washing the gi in cool water and seeing how it fits. If it's still large, continue with the next steps.
- First, step your washing machine to warm/hot water.
- Once your gi is finished, place it in the dryer at a reduced setting.
- Take your gi out and try it on. If the gi is “slightly” larger than you would like it, allow it to air dry the rest of the way and it will continue to shrink a bit until it dries completely. This will leave you with a near-perfect fit.
- If your gi is still too large, place it back in the dryer for another 5-10 minutes on hot until it fits.
Note: Different weaves and fabrics will shrink at a different rate. So what worked for one gi may be too much/too little for another.
A few readers have even speculated that if you wet down a certain part of your gi, it will shrink more rapidly than the rest of the gi.
So, if you only want to shorten the sleeves of your gi, experiment with wetting down only the sleeves before your dry it on hot for 5-10 minute intervals.
The directions from here will continue as if your gi fits your body exactly as you want it to.
- Wash in cold water.
- Never utilize Chlorine bleach.
- Hang or line dry.
Optional Recommendations for Blue/Black/Colored Gis
Prior to the 1st wash, saturate the gi inside the a sink or tub with 2-3 glasses of of white vinegar as well as mineral water. Let it soak for 20-30 minutes, and then wash. This will help set the color in your gi and minimize its fading.
On future washes, use only a color safe detergent.There is a lot of debate about using vinegar to lock in the color because many people argue that they lock in the follow well enough when it’s still at the factory. I can only attest to my personal experience, but I have always used vinegar to lock in the follow and I have never had any color come off my gi and my gis remain vibrantly colored even after years of training in them.
Getting the funk and stink out of your gi
A. Uncle Skippy's Sure-Fire Method
- Get a gallon of OdoBan at Home Depot for $10.
- Throw gi in wash and put 1/2 cup of OdoBan in bleach tray. If no bleach tray, fill tub and then add mid-cycle.
- Dry as you would normally.
Getting the nice citrus scented version will make your training partners happy when they take a deep breath. As they take in the moment, let out a “ahhhhhh” and look skyward from the pleasant smell, it is precisely at THAT moment that you choke them.
B. Gunslinger's Use of Force Policy
- Oxyclean in every wash (this I do always), hang dry on a hanger in front of a box fan.
- Mild funk detected: Soak in pure white vinegar for a few hours (use a 5 gallon bucket, put the gi in and pour in white vinegar until the entire gi is submerged) then wash as normal.
- If #2 fails: Pine sol. Add 1 cup of original pine sol (yes the stuff for floors) to your wash and wash as normal. This works VERY VERY well and does not stain your gi or damage the fabric (test it on a bath towel first if you are concerned).
- Pinesol has always worked for me. The catch is that you don’t get pine smelling detergent, but make sure it has pine oil in it. Pine oil kills bacteria. The goal is to kill the stuff that makes things smell, not just mask the smell. I will try Odoban just for a different smell option.
- This is more of a gunk than funk tip. There is a cleaner called Awesome (yes you read that right). It is super cheap and can be used for cleaning almost anywhere, and out of desperation I put some in the wash with my white gi one time and it knocked the grim off of it.
- And to add to the conversation – I don’t practice BJJ, but I would also recommend using a baking soda based deodorant to fight off your pit sweat getting your gi all nasty. You can also try using actual baking soda in your pits. Hmm… maybe I’m onto something here … a Baking Soda in Your Pits While Wearing a Gi micro-micro-niche.
- I have been using this stuff (Kenshield Athletic Laundry Sanitizer) for a few years now. It does an amazing job. It seems expensive but you don’t have to use much or that often. I only use once a month or so it last a long time. I just let it soak over night in the wash.
- I use white distilled vinegar in my bleach tray. BOOM.
- If B-3 fails, its time to walk away… seriously.